Water 92.1 % Ophthalmic Irrigation Solution

Purified Water 92.14%

Eyewash

INDICATIONS AND USAGE

For flushing the eye to remove loose foreign material, air pollutants or chlorinated water

WARNINGS

For external use only- Obtain immediate medical treatment for all open wounds in or near eyes. To avoid contamination, do not touch tip of container to any surface. Replace cap after use.

In concentrated form

While wearing contact lenses

For injection

In intraocular sugery

Internaly

if eye is lacerated or object is imbeded

if seal is broken

Changes in vision, continued redness, irritation or pain, or if the condition worsens or persist

If swallowed, get medical help or contact a Poison Control Center right away.

Directions

Concentrate must be diluted (1) part concentrate to (10) parts potable water before use
• Prepare sufficient quantity of constituted eyewash solution in advance of an emergency.
• Mix concentrate with potable water to prepare eyewash solution as follows:
• Determine quantity of eyewash solution required
• Follow sanitary procedures
• Wear protective eyewear and gloves
• Pour 1/3 of required amount of potable water into mixing container or eyewash unit
• Add 1/3 of required amount of concentrate to water
• Agitate or mix thoroughly
• Repeat until required amount of solution is prepared
• Properly dispose of empty bottle after use.
• Do not reuse • Keep bottle upright
• Replace solution no longer than (6) months after mixing

Benzalkonium chloride, edetate disodium, sodium chloride, sodium phosphate dibasic, sodium phosphate monobasic

USA: 800 430-5490

Canada: 888 212-7233
Honeywell Safety Products USA, 855 S. Mint Street, Charlotte, NC 28202

ASK A DOCTOR